Contact: zeng @ zegraph.com Last update: 20 January 2010

A matrix contains a pointer to a continuous memory block. Since ZeScript uses the term "array" for its hash array. "Matrix" is used here to mean numerical arrays of C-equivalent types of char, unsigned char, short, unsigned short, int, unsigned int, float, and double.

Data in a matrix are arranged in row major and row and column are counted from 0, as shown in the following figure.

Although matrix operations are intended for 1-D or 2D data, it does not mean that the matrix library cannot be used for higher dimensional cases. For example, assuming you have data of 3x3x3 stored in a hard disk, you can create a 3x9 matrix, read the data, and then treat each row as a 3x3 matrix.

Note that to test script examples in this guide, user must include

load("matrix.dll");

in the first line of a script file.

A matrix is created by the matrix() function:

A = matrix("int"); // create integer matrix of 1 x 1 B = matrix("float",10); // create float matrix of 10 x 1 C = matrix("double",10,10); // create double matrix of 10 x 10

Or functions with names related to C-types:

B = float(10); // create float matrix of 10 x 1 C = double(10,10); // create double matrix of 10 x 10 D = uchar(10,10); // create unsigned char matrix of 10 x 10

When the input numbers to those functions are more than 2, they are not mean to be matrix dimensions, but numbers for filling a 1D matrix:

E = int(1,2,3,4,5); // create 1x5 matrix and fill it with 1,2,3,4,5. E.csv();

When the input to a matrix creation function is a matrix, it means to duplicate the input matrix:

A = double(3,3); // create a 3x3 double matrix A.fill(1,1); B = int(A); // create a 3x3 int and fill it with A's data

Another simple way to duplicate a matrix is to use "+" operators:

A = int(10,10); // create in integer matrix of 10 x 10 A.fill(0,1); // a is filled with number from 0 to 99 B = A+0; // duplicate a

When adding 0 to a matrix, nothing more than matrix duplication happens. The same is true for subtracting 0 from a matrix and multiplying or dividing a matrix by 1.

The clone() function let you duplicate matrixes of different types:

A = uint(10,10); // create in unsigned integer matrix of 10 x 10 A.fill(0,1); // a is filled with number from 0 to 99 B = double(); B.clone(A); // resize B and transfer data from A to B C = double(A) // alternative way to clone a matrix

The ptr() function may be used to obtain the pointer of a matrix and pass it to functions of other libraries:

A = double(10,10); p = A.ptr(); ptr = p[0]; // the pointer n = p[1]; // the number of matrix element e = p[2]; // the number of bytes of an element [ptr,n,e] = A.ptr(); // A shortcut to get ptr, n, and e

A matrix may be thought of as an Excel worksheet. Being familiar with matrix indexing helps to manipulate matrix elements. The row and column index may be a integer, a matrix of char-type, or an array produced by a range expression.

A integer index specifies a row or column. When the column index is not given, a matrix is treated as 1 dimensional. For example,

A = int(2,3); // 2-rows, 3-columns int-type matrix A.fill(0,1); // A contains // [ 0 1 2 ] // [ 3 4 5 ] a = A[0,2]; // a is 2 b = A[5]; // b is 4 A[2] = 0; // A becomes // [ 0 1 0 ] // [ 3 4 5 ] A[1,1] = 0; // A becomes // [ 0 1 0 ] // [ 3 0 5 ]

The operator * may be used in a row/column index to indicate all element in the row/column:

A[*,1] = 9; // A becomes // [ 0 9 0 ] // [ 3 9 5 ] B = A[0,*] // B is // [ 0 9 0 ]

A char-type matrix is usually resulted from a comparison of matrix and may be used to get and set matrix elements. For example,

A = int(10,10); // 10-rows, 10-columns int-type matrix A.fill(0,1); // A contains // [ 0 1 ... 9 ] // [ 10 11 ... 19 ] // ... // [ 90 91 ... 99 ] I = A[1,*] > 10; // I is // [ 0 1 ... 1 ] A[1,I] = 0; // A becomes // [ 0 1 ... 9 ] // [ 10 0 ... 0 ] // ... // [ 90 91 ... 99 ] I = A > 10; // I contains // [ 0 0 ... 0 ] // [ 0 0 ... 0 ] // ... // [ 1 1 ... 1 ] A[I] = 0; // // [ 0 1 ... 9 ] // [ 10 0 ... 0 ] // ... // [ 0 0 ... 0 ]

Also you can use matrix indexing like

A[A>10] = 0;

You see that a matrix comparison produces a char-type matrix with 1 marking the true condition and 0 the false condition. When such a matrix is used as index, it means to set or get those elements where their corresponding index element is 1.

A range expression may be used to indicate the begin, the end, and the step of row or column:

A = int(2,10); A.fill(0,1); // A is // [ 0 1 2 3 4 5 6 7 8 9 ] // [ 10 11 12 13 14 15 16 17 18 19 ] A[*,5:*] = 0; // A becomes // [ 0 1 2 3 4 0 0 0 0 0 ] // [ 10 11 12 13 14 0 0 0 0 0 ] A.fill(0,1); // recover A A[1,0:6:2] = 0; // A becomes // [ 0 1 2 3 4 5 6 7 8 9 ] // [ 0 11 0 13 0 15 0 17 18 19 ]

Again the operator * may be used in a range expression to indicate to-the-end; and when the step is not given, it is assumed as 1.

When both row and column indices are specified by arrays, The set and get operations are mean to act on block data:

B = A[1:3,0:2]; // get a block of data from A starting // from row index 1 to 3 and column index 0 to 2 A[0:6:2,0] = 0; // set 0 to rows of 0,2,4,6 of the 2st column

The operators of <<, >>, ^, |, &, ~ for integer variable of ZeScript have been implemented in the matrix library for left column shifting, right column shifting, upward row shifting, vertical concatenation, horizontal concatenation, and transpose. For example,

A = int(3,3); A.fill(1,1); A.print(); /* show: 1 2 3 4 5 6 7 8 9 */ B = A << 1; B.print(); /* show 2 3 1 5 6 4 8 9 7 */ (A^-1).print(); /* show: 7 8 9 1 2 3 4 5 6 */ (A~).print(); /* show: 1 4 7 2 5 6 3 6 9 */ B = A | A*10; C = B & B; C.print(); /* show: 1 2 3 10 20 30 4 5 6 40 50 60 7 8 9 70 80 90 1 2 3 10 20 30 4 5 6 40 50 60 7 8 9 70 80 90 */

// convert longitude and latitude to point on sphere surface function convert(r, lon, lat) { lon *= 0.017453292519943; // degree to radius, i.e., 2pi/360 lat *= 0.017453292519943; z = r * sin(lat); d = r * cos(lat); x = d * cos(lon); y = d * sin(lon); return [x,y,z]; } a = convert(100,180,30); x = a[0]; // x is a number y = a[1]; // so is y z = a[2]; // and z too X = double(10); X.fill(0,10); Y = double(10); Y.fill(0,5); a = convert(100,X,Y); x = a[0]; // now x is a matrix y = a[1]; // so is y z = a[2]; // and z too

Using the set-add operator is more efficient then using the add operator because the later involves creation of a temporal matrix:

a = int(10,10); a = a + 10; // more efficient b = int(10,10); b += 10;

The same is true for -=, *=, /=, and etc.